User Test

The CAL3K_AP has a built in USER test which should be exercised once a day or after every power up. The test performs the indicated steps and the operator is asked to participate as indicated below. Each test step is displayed and HELP is available on every step.

See: HELP M900 - 999

The following is the FULL systems test applicable to the CAL3K-AP! Units like the CAL3K-A and CAL3K-U which have no "T26 : Exhaust Valve" the test is ignored.

T01: Parameter memory

T02: Result memory #1

T03: Result memory #2

T04: Base Sensor

T05: Ambient temperature 5 – 50°C

T06: ATC temperature sensors 1 – 50°C

T07: LCD Backlight

T08: Real Time

T09: Lid Lock drive and connection

T10: LID switch open/close: Close lid by hand

T11: Vessel supply

T12: Firing circuit charger

T13: ATC top drive and connection

T14: ATC bottom drive and connection

T15: FAN drive and connection

T16: Resolution switch (on Card) Toggle by hand

T17: Power switch (rear chassis) Toggle by hand

T18: Power supply voltage

T19: Power supply with maximum load

T20: ATC Top heating and sensor

T21: ATC Bottom heating and sensor

T22: Poly Temperature Sensor

T23: 5V rail

T24: LCD Backlight Switch

T25: Inflate Valve

T26: Exhaust Valve

T27: Pressure Sensor

T28: Spare

T29: CAL3K Summary

T30: VESSEL Communication Vessel must be inserted

T31: VESSEL Supply

T32: VESSEL Firing wire detection

T33: Firing Test

T34: Bomb internal test results

T35: VESSEL Inflation test Oxygen pressure!

T36: VESSEL Exhaust test

T37: Vessel Fault summation


To activate the USER test

CAL3K Keyboard Commands - Escape Key | DDS Calorimeters HOME
CAL3K Keyboard Commands - C Key | DDS CalorimetersCAL3K Keyboard Commands - A Key | DDS CalorimetersCAL3K Keyboard Commands - L Key | DDS CalorimetersCAL3K Keyboard Commands - 3 Key | DDS Calorimeters COMMAND
CAL3K Keyboard Commands - Enter Key | DDS Calorimeters ACCEPT COMMAND
YES

Each individual test can be operated by:

CAL3K Keyboard Commands - Escape Key | DDS Calorimeters HOME
CAL3K Keyboard Commands - C Key | DDS CalorimetersCAL3K Keyboard Commands - A Key | DDS CalorimetersCAL3K Keyboard Commands - L Key | DDS CalorimetersCAL3K Keyboard Commands - 3 Key | DDS Calorimeters COMMAND
CAL3K Keyboard Commands - Enter Key | DDS Calorimeters ACCEPT COMMAND
TEST NUMBER

READ AMBIENT AND BASE TEMPERATURE

The ‘READ’ Keyboard commands are ‘non-influential’, they just monitor in real time a particular condition.

Learn More

AUTOMATIC OXYGEN FILLING

The CAL3K_AP is connected to the oxygen supply and will FILL the vessel automatically. It will also DEFLATE the vessel. The process is monitored by the microprocessor.

Learn More

MAX AND STATS

The CAL3K keeps the following Maximum and statistical data: Maximum Vessel Start temperature, Date & Time, Maximum Vessel temperature, Date & Time...

Learn More

Leave a Reply

Your email address will not be published. Required fields are marked *